IR Illuminator – Part Three

On February 2, 2010, in Electronics, openFloor, by Vlad Cazan

NOTE: This is a continuation of a three part post. Part 1 can be found here, Part 2 can be found here. I finally finished soldering the IR LEDS on a breadboard in a matrix. I had 36 LEDs left after my experiments, so I decided to make a square 6 X 6. The connection […]

Tagged with:  

IR Illuminator – Part Two

On January 29, 2010, in Electronics, openFloor, by Vlad Cazan

In the previous post I had connected a LM317 Power Regulator to a row of 8 IR LED’s. Everything was working fairly well so I decided to run a few tests before soldering the LEDs to the board. I have changed the circuit and removed the potentiometer and created everything with only one resistor. I […]

Tagged with:  

Interactive Floor Projection – Project Proposal

On January 25, 2010, in openFloor, by Vlad Cazan

This is just a quick write up on the project and some of my goals for this semester. Concept The interactive floor projection project is a video-projection based installation that involves a projector being projected on the floor. With the use of infrared technology a camera that will be set up right beside the projector […]

Tagged with:  
Page 1 of 1 1

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

Highslide for Wordpress Plugin Weboy